Novu Strugač za drvo Teknamotor Skorpion 120 S

The chipper SKORPION 120 S is a machine designed for community service activities and road companies which need reliable equipment to work on current tree logging sites in built-up areas and on roadsides.

Thanks to high performance of this machine achieved by use of a 25 hp petrol engine, air cooled and with the throat of 285 mm wide and 165 mm high, it is possible to crush the branches together with their limbs and boughs (also leaves and needles), as well as circular wood up to a diameter of 12 cm. In order to maintain many hours of continuous operation, the chipper is equipped with a 40 liter fuel tank.

This model’s cutting system is made by a disc equipped with two cutting blades, co-working with two counter knives. The cutting knives life has been optimized by their double-sided sharpening, which allows them to be rotated by 180°, resulting in twice the length of their use. All the knives are made of appropriately selected tool steel and subjected to professional heat treatment. In addition, the chipper disc also fulfills the task of a fan and ejects the produced chips through the ejection tube, which can be positioned in any direction at a full 360° radius.

Skorpion 120 S has two pulling rollers driven by separate hydraulic motors from a hydraulic pump mounted on the chipper.

Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position.

The wood chipper equipped with an electronic No-stress system that automatically prevents overloading of the drive system by temporarily stopping the feed system. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs. The program "thick wood", "thin wood" allows a quick change of the working mode of the chipper to suit the currently shredded material and more effective work of the wood chipper. This system has a built-in hourly meter.

The Skorpion 120 S chopper has received European approval, which permits registration of the machine and traffic approval. It is equipped with overrunning brake and parking brake, LED traffic lights and a choice of spherical or eye catch.

The wood chips obtained through the chipping process can be used for direct combustion in furnaces, for production of compost, for decorative purposes and, after repeated shredding in hammer mill, as a raw material for production of briquettes and pellets.

Overall dimensions (length x width x height) 3710 x 1800 x 2270 [mm]

Weight 860 [kg]

Branch diameter 120 [mm]

No of knives 2 cutting + 2 counter-knife

Feeding speed up to 33 [running meters/min]

Chipping capacity up to 8 [stère meters/h]

Chip width from 9 to 11 [mm]

Feeding unit hydraulic feeder

Disk diameter 550 [mm]

Hopper dimensions (width x height) 285 x 165 [mm]

ENGINE TECHNICAL DATA

Engine model KOHLER Command PRO CH742

Engine cubic capacity 747 [cm3]

Power of engine 25 [hp]

Type of cooling air

Type of fuel petrol

Fuel tank capacity 40 [l]

Start-up electric

Equipment included:

-Counter of operating hours

-Spare wheel

-Adjustment of height of ejecting the chips

-Rotary chimney 360°

-No-stress system

Additional accessories on request:

-Extension of the ejection tube

show contacts