Fabrika asfalta

Model : Tillverkad av ägare

VAT : 25

Internal stock no : S6699

Please provide reference number upon request: S6699

Complete mobile asphalt plant, 70 tons per hour! With 6 asphalt thermoses

It is not only a complete asphalt plant that is sold, but also a unique patented one

construction. Full documentation and drawings are available.

The idea behind the construction is a slightly moved asphalt plant = Mobile Asphalt System.

Simple and quick to establish.

Move the asphalt plant instead of the place to transport asphalt masses

Long size shoes.

In order to achieve mobility, asphalt flats were designed and patented = Asphalt thermos.

The idea with these asphalt thermoses is to, instead of traditional silos like that

the produced asphalt mass is stored in before it is put on the truck, directly fill the asphalt flatbeds

with the asphalt mass produced.

In order not to leave these trucks while the asphalt mass is being produced, the asphalt flatbeds were built on

load tv xlar frames.

These asphalt thermoses, which keep the asphalt mass warm for a day, are also possible to

trucks that transport the asphalt mass between production and laying do just that

and another truck, e.g. the one who transports asphalt there more and more, more

the asphalt thermoses.

In this place, trucks are used more efficiently and do not get stuck in the yard

pt mning.

Is there a picture when the truck comes with filled asphalt thermoses and

st ller of these. After that, the truck pulls the already empty mda and these are transported back

to the asphalt plant.

In the asphalt plant, it is possible to manufacture all types of asphalt compounds: Cold, semi-warm, hot and

recycling.

The asphalt plant itself = infeed belt, drying drum and mixer, is built to a standard

container frame, 40 foot high, for easy shipping.

Conveyor belt and drying drum are hydraulically driven.

The dryer's oil burner is electrically driven.

The mixer is bolted.

Bogie wheel steel ll and kingpin are bolted to the container frame for easy removal and reassembly

the asphalt plant must be shipped on a container ship.

The mixer part is also bolted so that it can be easily removed if necessary.

The power package is mounted on a truck trailer together with 9 m3 br nsle- and 35 m3

insulated bitumen tank.

The tanks are equipped with splash guards, which makes the slpet transportable regardless of the volume in the tanks.

Bitumen tank has heating pipes and burners for heating.

The drying drum is shortened, whereby the mixer does not stick out as much as it does

that the asphalt plant can also be pulled by a single-axle tractor.

Cold dosing is moved with a load shifter, which also pulls the fuel tank.

A wheel loader must be in place at the establishment site.

When the trucks arrive at the establishment site, the load changer places the tank slip in place,

time 15 min.

Then the trailer puller sets the asphalt plant itself in place at a 90 degree angle and three m

ifr n tanksl pet.

Hydraulic support legs free the asphalt plant from a tractor and are then used for lowering

r tt slope obtained, time 50 min.

The infeed belt, for the drying drum, is lowered with the help of the wheel loader and mounted on

place, time 25 min.

The loader places the cold dosage in place as the wheel loader pushes it in

sideways in place so the input belt ends up straight, time 60 min.

The wheel loader and machinist install the r ret between the suction fan and

energy recovery, time 40 min.

The wheel loader fills up any ramps in front of loading cold dosing at the same time as

machinist connects electrical cables, hydraulic and fuel hoses between drive pack and

the asphalt plant, time 35 min.

The wheel loader and machinist fill up the cold dosage pages for each volume, time 15 min.

Total time 4 hours and the asphalt plant is ready for production.

Capacity when manufacturing hot asphalt mass: 70 tons/h.

Capacity when manufacturing cold asphalt mass: 110 tons/h.

Production of hot asphalt mass with 70% recycling.

Laying asphalt mass with 70% recycling.

The asphalt plant rf rset with recycling.

excess energy from the drying drum is used to heat incoming ballast.

6 asphalt thermoses:

The one furthest to the right has room for a 2.5 ton two-wheeled wheel.

It is also equipped with four stones and a tailgate for asphalt spreaders.

Capacity 12 and 17 tons of asphalt mass.

This also has stones and a tailgate for asphalt spreaders